Product Description

Electric Gear Motor 1067 RPM - 6V to 18V DC

This is a very high quality, perfect for RC cars and trucks. Look at the specs below and see if you can use one for your project today!



Main body length: 1.962 inches (49.85mm)

Entire motor length, including shaft and contacts: 2.965 inches (75.31mm)

Width/Diameter: 0.981 (24.93mm)

1st set screw hole centers are roughly: 0.659 inches (16.74mm) apart

2nd set screw hole centers are roughly: 0.772 inches (19.61mm) apart

Shaft bearing/bushing bezel diameter: 0.274 inches (6.96mm)

Protruding shaft length: 0.602 inches (15.29mm)

Shaft diameter: 0.156 inches (3.98mm)

Shaft flat side to round side diameter: 0.135 (3.44mm)

Shaft flat cut length: 0.476 inches (12.08mm)

Gear ratio: 1:10.3

Mounting screw size: 3mm

Current (no load): 0.23A

Rated torque: 0.3 kgf-cm



Voltage: 6 minimum and 18 volts DC max.

RPM: 900~ to 1067 (depending on voltage)



All measurements are approximate. We can NOT give more accurate measurements.

USA STOCK, call for stock status.

Pack Quantity: 1 pc