manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw (included).
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
|Terminal Type:||Solder Terminals for 24AWG + Smaller Wire|
|Current Rating:||6A / 125VAC|
|Initial Contact Resistance:||5 Meg ohm (Max)|
|Insulation Resistance:||100 Meg Ohm (Min)|
|Dielectric Strength:||1000V AC for 1 minute|
|Contact Material:||Bronze, Silver Plated|
|Terminal Material:||Copper, Silver Plated|