Vetco Electronics • 425-641-7275

TOP
Browsing as guest
Log in

Back

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

  • {{ highlight }}


Tap For Full Product Description
Hide Full Product Description

Product Description


This is a Blue COB LED strip that comes with a strip of adhesive on its back.


These are fantastically bright and are perfect for:
-Computer cases
-Vehicle installation under the hood, under foot wells, as dome lights and more
-In home lighting and under cabinet lighting
-Much, much more!

 

NOTE: these strips REQUIRE ONLY 12 Volts DC. If you supply any more than 12 V, you need to add a voltage regulator OR a current limiting resistor to the circuit or you will burn the strip up due to thermal runaway. If you are using this in a vehicle, then you MUST do the above. Vehicles charge their batteries at around 13 to 14.5 volts, this is enough to destroy these strips and possibly burn them up. By our calculations, if you want to use these in a vehicle, you should get a 27 ohm resistor in at least 1/2 watt. See link below:

https://vetco.net/products/27-ohm-1-2-watt-resistor

 


PACK QTY: 1 Strip




Click here to read the California regulatory warning.