Home
> Arduino & Raspberry Pi Products
> Arduino & Pi Add Ons
> Hall-Effect Sensor - Allegro A3144EUA (D63)
Hall-Effect Sensor - Allegro A3144EUA (D63)
SKU: VUPN6596
Hall-Effect Sensor Module for Arduino
Detect the proximity of a magnet with this Hall Effect sensor module. When the magnetic field rises above a threshold level, the open-collector output transistor switches on, which pulls the logic-compatible output low and illuminates the onboard LED indicator.
Its fast (The turn-on threshold is 35-450 Gauss, the minimum hysteresis is 20 Gauss, and the operating voltage range is 4.5 - 24 volts.
This module uses the Allegro MicroSystems A3144EUA sensor. It has a 3 pin interface, signal, V+ and GND.
This is a TO92 Style package. We also have the same sensor mounted on a PC Board with 0.1" header pins (VUPN6351).
QTY: 1 x Hall-Effect Sensor Module for Arduino
Detect the proximity of a magnet with this Hall Effect sensor module. When the magnetic field rises above a threshold level, the open-collector output transistor switches on, which pulls the logic-compatible output low and illuminates the onboard LED indicator.
Its fast (The turn-on threshold is 35-450 Gauss, the minimum hysteresis is 20 Gauss, and the operating voltage range is 4.5 - 24 volts.
This module uses the Allegro MicroSystems A3144EUA sensor. It has a 3 pin interface, signal, V+ and GND.
This is a TO92 Style package. We also have the same sensor mounted on a PC Board with 0.1" header pins (VUPN6351).
QTY: 1 x Hall-Effect Sensor Module for Arduino
Hall-Effect Sensor Module for Arduino
Detect the proximity of a magnet with this Hall Effect sensor module. When the magnetic field rises above a threshold level, the open-collector output transistor switches on, which pulls the logic-compatible output low and illuminates the onboard LED indicator.
Its fast (The turn-on threshold is 35-450 Gauss, the minimum hysteresis is 20 Gauss, and the operating voltage range is 4.5 - 24 volts.
This module uses the Allegro MicroSystems A3144EUA sensor. It has a 3 pin interface, signal, V+ and GND.
This is a TO92 Style package. We also have the same sensor mounted on a PC Board with 0.1" header pins (VUPN6351).
QTY: 1 x Hall-Effect Sensor Module for Arduino
Detect the proximity of a magnet with this Hall Effect sensor module. When the magnetic field rises above a threshold level, the open-collector output transistor switches on, which pulls the logic-compatible output low and illuminates the onboard LED indicator.
Its fast (The turn-on threshold is 35-450 Gauss, the minimum hysteresis is 20 Gauss, and the operating voltage range is 4.5 - 24 volts.
This module uses the Allegro MicroSystems A3144EUA sensor. It has a 3 pin interface, signal, V+ and GND.
This is a TO92 Style package. We also have the same sensor mounted on a PC Board with 0.1" header pins (VUPN6351).
QTY: 1 x Hall-Effect Sensor Module for Arduino