Kapton Tape Roll 1" (25.4mm) wide
Current Stock is: 1 Mil Kapton Tape (Polyimide) - 1" X 36 Yds (1 inches wide by 108 feet, or 25.4mm wide by 32.9184 Meters)
Developed by DuPont and favored by NASA since the days of Apollo, this polyimide film is exceptional for its high thermal resistance, high dielectric strength, high X-ray transmittivity, and its mechanical stability at temperatures ranging from absolute zero to 200°C.
Employ this tape as a substrate for 3D extrusion printing; as a mask for hot-air soldering; as the dielectric in a high-voltage capacitor, as an electrical barrier between closely-stacked circuit boards; or as insulation for hot wire.
It is coated on one side with zero-residue high-temperature silicone adhesive.
1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).
Technical Data Sheet:
Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards
Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.
Kapton® is a registered trademark of DuPont
Current Stock is: 1 Mil Kapton Tape (Polyimide) - 1" X 36 Yds (1 inches wide by 108 feet, or 25.4mm wide by 32.9184 Meters)
Developed by DuPont and favored by NASA since the days of Apollo, this polyimide film is exceptional for its high thermal resistance, high dielectric strength, high X-ray transmittivity, and its mechanical stability at temperatures ranging from absolute zero to 200°C.
Employ this tape as a substrate for 3D extrusion printing; as a mask for hot-air soldering; as the dielectric in a high-voltage capacitor, as an electrical barrier between closely-stacked circuit boards; or as insulation for hot wire.
It is coated on one side with zero-residue high-temperature silicone adhesive.
1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).
Technical Data Sheet:
Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards
Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.
Kapton® is a registered trademark of DuPont