USB Li-Ion Battery Charger with Molex 51006 51005 plugs on it.

Works with our: 3.7v LiPo BATTERY

USB 5V DC input and 3.7V Output for charging 1S Lipo Lithium Battery

USB Cable Charger with Molex 51006 51005 plug.

Instructions:

1, connect the LiPo battery to the Molex connector on the end of the cable.

2, plug the USB charger into a USB port that provides at LEAST 500 mA (most PC ports, most phone chargers).

3, a red LED should come on (can be seen through plastic) which indicates charging. Once the battery is done charging, the LED will turn off.

NOTE: If your battery is already fully charged, the LED may not turn on at all. It also may not turn on, or it may flash if it detects a bad battery. There is only one color for the LED and it is red. Charging time is dependent on battery capacity. We don't have a chart for this.

This charger includes a micro-controller which is programed to charge 3.7V LiPo batteries.

 

Note: For Lipo battery only, do not use for Nimh or Ni-Cd battery.

Package included:
1PC*USB battery charger cable (battery not included)