SUNLU Matte PLA Filament 1.75mm Lime Green 1kg
SUNLU Matte PLA Filament 1.75mm Lime Green 1kg
SUNLU Matte PLA in a bright lime (sprout) green brings a smooth, non-reflective finish to your prints. The matte surface scatters light instead of shining, which softens visible layer lines and gives finished models a clean, professional look straight off the bed.
This is standard easy-printing PLA with a matte pigment, so it runs on virtually any open-material FDM printer without special hardware while giving you a more refined surface than glossy PLA.
Matte Finish That Hides Layer Lines
The matte formulation diffuses light across the print surface, reducing glare and making layer lines far less noticeable. That makes this lime green PLA a strong choice for display pieces, cosplay props, figurines, and any model where you want the shape to stand out rather than the sheen.
Consistent Diameter for Reliable Extrusion
Held to a tight 1.75mm diameter with a dimensional tolerance of +/- 0.02mm, this filament feeds and extrudes consistently, helping you avoid under- and over-extrusion across long prints.
Recommended Print Settings
- Diameter: 1.75mm (+/- 0.02mm)
- Material: Matte PLA
- Net weight: 1kg (2.2 lb)
- Nozzle temperature: 205 to 215 C
- Print speed: 50 to 100 mm/s
- Heated bed: not required for PLA; around 50 to 60 C works well
Every printer and slicer is a little different, so fine-tune within these ranges for the best surface on your machine.
Great for Enthusiast and Everyday Printing
Whether you are printing detailed display models or knocking out quick prototypes, this SUNLU matte lime green PLA (Vetco SKU VUPN2969) delivers easy, dependable printing with a finish that looks a step above ordinary glossy filament.
SUNLU Matte PLA Filament 1.75mm Lime Green 1kg
SUNLU Matte PLA in a bright lime (sprout) green brings a smooth, non-reflective finish to your prints. The matte surface scatters light instead of shining, which softens visible layer lines and gives finished models a clean, professional look straight off the bed.
This is standard easy-printing PLA with a matte pigment, so it runs on virtually any open-material FDM printer without special hardware while giving you a more refined surface than glossy PLA.
Matte Finish That Hides Layer Lines
The matte formulation diffuses light across the print surface, reducing glare and making layer lines far less noticeable. That makes this lime green PLA a strong choice for display pieces, cosplay props, figurines, and any model where you want the shape to stand out rather than the sheen.
Consistent Diameter for Reliable Extrusion
Held to a tight 1.75mm diameter with a dimensional tolerance of +/- 0.02mm, this filament feeds and extrudes consistently, helping you avoid under- and over-extrusion across long prints.
Recommended Print Settings
- Diameter: 1.75mm (+/- 0.02mm)
- Material: Matte PLA
- Net weight: 1kg (2.2 lb)
- Nozzle temperature: 205 to 215 C
- Print speed: 50 to 100 mm/s
- Heated bed: not required for PLA; around 50 to 60 C works well
Every printer and slicer is a little different, so fine-tune within these ranges for the best surface on your machine.
Great for Enthusiast and Everyday Printing
Whether you are printing detailed display models or knocking out quick prototypes, this SUNLU matte lime green PLA (Vetco SKU VUPN2969) delivers easy, dependable printing with a finish that looks a step above ordinary glossy filament.