Desoldering Braid Solder Wick 25 ft Roll 2.0 mm (0.079 inch) RMA #3 Green
RMA Super Wick 400 Series Copper Solder Wick
This copper solder wick is a professional-grade desoldering solution for removing excess solder, cleaning PCB pads, correcting solder bridges, and completing precise circuit board repairs. The tightly woven braid is manufactured from high-purity, oxide-free copper and pre-coated with RMA (rosin mildly activated) flux for fast, consistent solder absorption.
With a width of 2.0 mm (0.079 inch, approximately 0.08 inch), this #3 green desoldering braid is well suited for through-hole desoldering, surface mount touch-up, benchtop servicing, and general PCB rework. The 25 ft (7.5 m) roll provides ample material for production work, repair facilities, electronics laboratories, and service benches.
Fast-Wicking Copper Desoldering Braid
The closely woven copper construction provides rapid capillary action, allowing molten solder to flow efficiently into the braid. Its RMA flux coating promotes fast wicking action and minimal dwell time, helping technicians complete localized solder removal without applying unnecessary heat to nearby components.
This fluxed solder removal braid meets ANSI/IPC J-STD-004 type ROL0 requirements. It is also RoHS compliant and listed under the NSF nonfood compounds program.
Solder Wick for PCB Rework and Repair
Unlike broad-area hot air methods or vacuum rework equipment, this PCB solder removal wick delivers precise, localized heat transfer at the point of contact. This controlled approach can reduce thermal stress on sensitive components and the PCB substrate while improving access to individual pads, joints, and solder bridges.
Recommended applications include:
- Removing excess solder from PCB pads and component leads
- Cleaning solder pads before component replacement
- Correcting solder bridges and rework defects
- Desoldering through-hole component connections
- Surface mount and SMT touch-up
- General circuit board rework and repair
- Benchtop electronics servicing
RMA Flux Solder Wick Specifications
| Product Type | Copper desoldering braid / solder wick |
|---|---|
| Series | RMA Super Wick 400 Series |
| Model / Catalog Number | 443 |
| Size Identification | #3 Green |
| Braid Width | 2.0 mm (0.079 inch, approximately 0.08 inch) |
| Roll Length | 25 ft (7.5 m) |
| Braid Material | High-purity, oxide-free copper |
| Flux Type | RMA (rosin mildly activated) |
| Flux Classification | ANSI/IPC J-STD-004 type ROL0 |
| Spool Type | Non-ESD spool / bobbin |
| Compliance | RoHS compliant |
| Program Listing | NSF nonfood compounds program listed |
| Retail Price | $33.70 |
Professional 2 mm Solder Wick for Electronics Servicing
This 2 mm desoldering wick combines precise handling, rapid solder absorption, and a long 25 ft roll for professional electronics rework. Its #3 width offers a practical balance for cleaning pads, servicing through-hole joints, and performing detailed SMT repairs where controlled solder removal is essential.
RMA Super Wick 400 Series Copper Solder Wick
This copper solder wick is a professional-grade desoldering solution for removing excess solder, cleaning PCB pads, correcting solder bridges, and completing precise circuit board repairs. The tightly woven braid is manufactured from high-purity, oxide-free copper and pre-coated with RMA (rosin mildly activated) flux for fast, consistent solder absorption.
With a width of 2.0 mm (0.079 inch, approximately 0.08 inch), this #3 green desoldering braid is well suited for through-hole desoldering, surface mount touch-up, benchtop servicing, and general PCB rework. The 25 ft (7.5 m) roll provides ample material for production work, repair facilities, electronics laboratories, and service benches.
Fast-Wicking Copper Desoldering Braid
The closely woven copper construction provides rapid capillary action, allowing molten solder to flow efficiently into the braid. Its RMA flux coating promotes fast wicking action and minimal dwell time, helping technicians complete localized solder removal without applying unnecessary heat to nearby components.
This fluxed solder removal braid meets ANSI/IPC J-STD-004 type ROL0 requirements. It is also RoHS compliant and listed under the NSF nonfood compounds program.
Solder Wick for PCB Rework and Repair
Unlike broad-area hot air methods or vacuum rework equipment, this PCB solder removal wick delivers precise, localized heat transfer at the point of contact. This controlled approach can reduce thermal stress on sensitive components and the PCB substrate while improving access to individual pads, joints, and solder bridges.
Recommended applications include:
- Removing excess solder from PCB pads and component leads
- Cleaning solder pads before component replacement
- Correcting solder bridges and rework defects
- Desoldering through-hole component connections
- Surface mount and SMT touch-up
- General circuit board rework and repair
- Benchtop electronics servicing
RMA Flux Solder Wick Specifications
| Product Type | Copper desoldering braid / solder wick |
|---|---|
| Series | RMA Super Wick 400 Series |
| Model / Catalog Number | 443 |
| Size Identification | #3 Green |
| Braid Width | 2.0 mm (0.079 inch, approximately 0.08 inch) |
| Roll Length | 25 ft (7.5 m) |
| Braid Material | High-purity, oxide-free copper |
| Flux Type | RMA (rosin mildly activated) |
| Flux Classification | ANSI/IPC J-STD-004 type ROL0 |
| Spool Type | Non-ESD spool / bobbin |
| Compliance | RoHS compliant |
| Program Listing | NSF nonfood compounds program listed |
| Retail Price | $33.70 |
Professional 2 mm Solder Wick for Electronics Servicing
This 2 mm desoldering wick combines precise handling, rapid solder absorption, and a long 25 ft roll for professional electronics rework. Its #3 width offers a practical balance for cleaning pads, servicing through-hole joints, and performing detailed SMT repairs where controlled solder removal is essential.