Size #2 Desoldering Braid with RMA Flux, 1.5 mm x 50 ft

Professional Desoldering Braid for PCB Rework

This size #2 desoldering braid provides fast, controlled solder removal for professional electronics rework, PCB repair, and benchtop servicing. The tightly woven, oxide-free, high-purity copper braid is pre-coated with RMA rosin mildly activated flux to promote rapid wicking with minimal dwell time.

At 1.5 mm (0.059 in) wide, the braid supports precise, localized heat transfer for removing excess solder, cleaning circuit board pads, and correcting solder bridges. This controlled approach helps reduce thermal stress compared with hot air or vacuum rework methods.

50 ft Copper Solder Wick for High-Volume Use

The longer 50 ft (15 m) economy spool is well suited for repair facilities, production benches, service departments, and other high-volume work areas. Its compact size #2 width offers a practical balance between solder capacity and placement accuracy for through-hole connections and surface mount touch-up.

The yellow size identification makes the braid easy to recognize at the workbench. This product is supplied on a non-ESD spool and should be handled according to the static-control requirements of the work environment.

Flux-Coated Solder Wick for Precise Solder Removal

The RMA flux coating improves wetting and encourages molten solder to flow quickly into the copper braid. Fast wicking action minimizes the amount of time the soldering iron must remain in contact with the work area, helping protect sensitive pads, traces, and nearby components during localized repairs.

This PCB desoldering braid is ideal for general circuit board rework, through-hole repair, surface mount touch-up, solder bridge correction, pad cleanup, and excess solder removal. The flux meets ANSI/IPC J-STD-004 type ROL0 requirements. The product is also listed under the NSF Nonfood Compounds Program.

Desoldering Wick Technical Specifications