Ferric Chloride Solution - 1 Gallon
Mg 415 4l

Ferric Chloride Solution - 1 Gallon

Part number: MG-415-4L
$34.95
Ferric Chloride Solution - 1 Gallon
MG Chemicals Part Number: 415-4L
Copper Etchant Solution
Ready to use solution designed for etching printed circuit boards and other metals. This is a pre-mixed solution. No additional steps are necessary to prepare this for use - Do not dilute this product with water.

This 1 Gallon container for Ferric Chloride Etchant can etch up to 3840 square inches of Copper Clad PC Board! Etching Rate: 175-200 μin /minute @ 50-55°C (μin= microinch)
Directions:
Immerse copper board in solution and agitate until etching action is completed. Ferric Chloride can etch up to a maximum of 100g of copper per liter of solution (.33 square meters or 3.5 square feet of 1 oz copper clad board).

Etching process can be sped up by heating the solution to a temperature no higher than 55°C (135°F).
The MSDS document can be found here:http://www.mgchemicals.com/downloads/msds/english/sds-415-l.pdf

QTY: 1 x 1 Gallon (4 Liters) Bottle of Ferric Chloride Etchant
**NOTE: THIS PRODUCT CANNOT BE SHIPPED BY AIR - IT MUST SHIP UPS GROUND ONLY.**

Alternate Supplier Part Number: PH-12-2039 - This item may be substituted if the manufacturer is temporarily out of stock.
Product condition: New