Vetco Electronics • 425-641-7275

TOP
Browsing as guest
Log in

Back

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

  • {{ highlight }}

Frequently bought together

+

Tap For Full Product Description
Hide Full Product Description

This product has 1 related files, and can be downloaded for free.

  1. FTDI_Arduino_Driver_CDM21228_Setup (ZIP)

Product Description


Arduino Compatible UNO R3 Microcontroller, with removable Genuine ATmega328 chip.
Vetco stocks a 100% compatible version the very popular Arduino series of Microcontrollers. The Arduino is the easist way to get started in the world of microcontrollers and it has an extremely active hobbiest community. The programming software is free and there are many, many toutorials and code samples available for FREE online.

This Arduino Uno R3 has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

This built to the same specifications as latest revision of the Uno, the R3, uses the more capable Atmega 16U2 USB interface chip, which has twice as much flash memory as the Atmega 8U2 used in previous Uno revisions.

Specifications:

  • Microcontroller: ATMEL ATMEGA328P Removable Chip (included)
  • Operating Voltage: 5VDC
  • Input Voltage (recommended): 7-12VDC
  • Input Voltage (min/max): 6-20VDC
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40mA
  • DC Current for 3.3V Pin: 50mA
  • Flash Memory: 32KB* (ATmega328) *0.5 KB used by Arduino bootloader
  • SRAM: 2KB
  • EEPROM: 1KB
  • Clock Speed: 16MHz

This item is just an Arduino UNO compatible Microcontroller - It is not the official Arduino branded board, and is supported by Vetco Electronics directly for warranty purposes. No additional shields, power supplies, cables, software or other accessories are included. Vetco sells an ever increasing selection of Arduino shields and Arduino sensors. These can come with any one of these three USB port types: USB B, USB Micro, USB Mini. If you need a specific type for the project you are building, please note it in the comments section when ordering and we will see if we have the port type you require in stock. This and the MEGA use an alternate USB to serial chip which needs a different driver than is supplied with the Arduino IDE.

DRIVER AND INSTALLATION NOTICE: Please use this driver to install the USB to Serial on the Uno, Uno With Removable Chip and MEGA: located above under the "Additional Files" section.

There are any one of THREE types of USB to Serial chips included with Arduinos now days. You could have a Standard Uno chip which the IDE has the driver for. You could have a CH341 Chip, which you MUST download the "DOWNLOAD ch341ser DRIVER" to use. OR you may have the FTDI chip which you MUST download the "FTDI_Arduino_Driver_CDM21228_Setup" driver to use.

Vetco does not support the use of discontinued operating systems like Win 98, Win XP, Win Vista, Win 7 or Win 8/8.1. Though you may be able to get these drivers and boards to work on these older systems, we can not supply support or assistance.

The Apple Mac drivers (even the one marked MAC) are not compatable with M1 or M2 Macs. They are for Intel Macs Only! Vetco does not have access to an M1 or M2 Mac and can not assist with any attempt to get these working with M1/M2 Macs.

We do offer limited assistance if you are using a laptop and can bring it into our store. We will upload a guide for installing Arduino drivers.

" QTY: 1 x Arduno Compatible UNO R3 Microcontroller.




Click here to read the California regulatory warning.