120VAC Snap-In Neon Indicator Lamp - Philmore
Need a SUPER SIMPLE way to indicate if your 120V AC device or panel is powered on?
Or need a status indicator or light?
Then these SUPER easy to use 120V Neon indicators will do exactly what you want!
Since these already have leads on them, adding them to an AC circuit is a snap!
These panel lamps have a built-in resistor and are made to operate on 120V AC only.
The lens is 12.5 mm in diameter with a chrome bezel.
The mounting hole is 12.7mm (1/2”) and they have wire leads.
You can order these in Green, Amber(yellow) or Red. Select your option above!
One per pack. Order as many packs as you like.
Need a SUPER SIMPLE way to indicate if your 120V AC device or panel is powered on?
Or need a status indicator or light?
Then these SUPER easy to use 120V Neon indicators will do exactly what you want!
Since these already have leads on them, adding them to an AC circuit is a snap!
These panel lamps have a built-in resistor and are made to operate on 120V AC only.
The lens is 12.5 mm in diameter with a chrome bezel.
The mounting hole is 12.7mm (1/2”) and they have wire leads.
You can order these in Green, Amber(yellow) or Red. Select your option above!
One per pack. Order as many packs as you like.