IC Pattern Protoboard 1.75" x 1.75" QTY: 2
SKU: 12-607
IC Pattern Prototyping Board - 1.75" x 1.75" QTY: 2
This is a tiny, high-quality Prototyping PC Board made to accept a DIP IC or IC socket. It's pre-drilled with copper plated solder islands on standard 0.100" centers. Each lead from the IC is brought out to the end of the board with copper traces, and features a total of 5 holes per trace, with several additional on each end for first and last two traces (additional ground and power connections, etc.)
This PC Prototype board also features 4 mounting holes that are spaced 1.5" apart - Ideal for use with our PC Board stand-offs or for easy mounting in a project box.
Features:
This is a tiny, high-quality Prototyping PC Board made to accept a DIP IC or IC socket. It's pre-drilled with copper plated solder islands on standard 0.100" centers. Each lead from the IC is brought out to the end of the board with copper traces, and features a total of 5 holes per trace, with several additional on each end for first and last two traces (additional ground and power connections, etc.)
This PC Prototype board also features 4 mounting holes that are spaced 1.5" apart - Ideal for use with our PC Board stand-offs or for easy mounting in a project box.
Features:
- Phenolic Single Sided PC Board Material
- 0.100" Spaced Holes
- Accepts DIP IC's or Sockets up to 20 Pins, including wide DIP packages
- 1.75" Square with 4 mounting holes spaced 1.5" apart
IC Pattern Prototyping Board - 1.75" x 1.75" QTY: 2
This is a tiny, high-quality Prototyping PC Board made to accept a DIP IC or IC socket. It's pre-drilled with copper plated solder islands on standard 0.100" centers. Each lead from the IC is brought out to the end of the board with copper traces, and features a total of 5 holes per trace, with several additional on each end for first and last two traces (additional ground and power connections, etc.)
This PC Prototype board also features 4 mounting holes that are spaced 1.5" apart - Ideal for use with our PC Board stand-offs or for easy mounting in a project box.
Features:
This is a tiny, high-quality Prototyping PC Board made to accept a DIP IC or IC socket. It's pre-drilled with copper plated solder islands on standard 0.100" centers. Each lead from the IC is brought out to the end of the board with copper traces, and features a total of 5 holes per trace, with several additional on each end for first and last two traces (additional ground and power connections, etc.)
This PC Prototype board also features 4 mounting holes that are spaced 1.5" apart - Ideal for use with our PC Board stand-offs or for easy mounting in a project box.
Features:
- Phenolic Single Sided PC Board Material
- 0.100" Spaced Holes
- Accepts DIP IC's or Sockets up to 20 Pins, including wide DIP packages
- 1.75" Square with 4 mounting holes spaced 1.5" apart