Vetco Electronics • 425-641-7275


Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Recommended Products

Product Description

Xytronix LF-8800 High Powered Soldering/Desoldering Station
This is a high-powered, 100 Watt Solder and Desoldering Station, with internal vacuum pump. It's an all-in-one repair/rework station, perfect for the repair bench. This set even includes a fume extractor. Perfect for both lead-free and leaded solder/desoldering

Features of the LF-8800:
  • Heater/Sensor Failed Detection: If sensor circuit fails, the heater power is shut down.
  • Temperature “Lock-Out” feature: The temperature can be locked with a password code.
  • ESD Safe and Spike Free circuitry: The “Zero Voltage” electronic switching design protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.
  • Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released
  • Energy Saver Mode: If the station is left idle for 20 minutes, the energy saver feature will automatically engage, resetting the temperature to 150°C from the previous setting.
  • Iron Working Option: Both soldering, desoldering irons can be used at the same time.
  • Optional SMD Tweezers: Specially designed for SMD chips, SOT, Flat pack IC’s etc. reworking.
  • Optional Hot Air Pencil (HAP 80): Removes SMD chips and flat packs up to 25mm.

This station includes the following:
  • Soldering iron with pre-loaded standard tip
  • Desoldering iron with pre-loaded standard tip
  • 2 iron holders
  • 426DLX Fume extractor
  • AC power cord and plug
  • Operation manual

This station uses the 307B iron, for which we have the following tips:

AC Power: 110VAC
Iron Assembly: Solder Iron Desolder Iron Tweezers (Optional) Hot Air Pencil (Optional)
Part Number: 307A DIA100 TWZ90 HAP80
Heater Output: 32VAC 32VAC 32VAC 32VAC
Heater Power: 100W 100W 90W 80W
Vacuum Pump Operating Voltage: 115VAC (100~120VAC)
Temperature Range: 302-896°F 572-842°F 300-800°F 400-850°F
Standard Tip: XY-44-710652 XY-44-915412 XY-46-060102 XY-42-424710
Dimensions: 7.5" x 11.5" x 4.75"

Product condition: New

WARNING: Cancer and Reproductive Harm -