Small Series 2 Pin Male Chassis Mount Waterproof Connector - 20-26 AWG
This waterproof connector is Field Installable and creates a reliable, waterproof connection without any special tools or chemicals. Avoid messy silicone goop and layers of ugly electrical tape - Our line of Waterproof connectors is perfectly suited for Marine, Automotive, and Industrial applications. Available in Inline Connectors, Panel/Chassis Mount Connectors and Pre-assembled cables, you can be sure to find the right combination of connectors to fit your needs. Ideal for power transmission (up to 5A) and communications/data purposes.
A series of internal compression gaskets and o-rings combine with a positive locking, threaded ring on the male connector to securely attach the connectors together while maintaining a water-tight seal around the cable.
Designed for easy installation in the field, these connectors are easy to assemble - only a soldering iron and wire cutters are required. Internal gaskets in the connector housing compress to fully seal around the cable as it exits the connector. No additional waterproofing is necessary.
| Number of Pins: | 2 |
| Rated Current (40°C): | 5 Amps |
| Voltage Rating: | 110 Volts |
| Max Wire Gauge: | 20 AWG |
| Max Panel Thickness: | 4.0mm |
| Environmental Protection: | IP67/IP68 |
| Mechanical Life: | 500 Mating Cycles |
| Operating Temperature: | -45°C ~ 105°C |
Max Panel Thickness: 4mm
Panel Cutout: 10.4mm
Dimensions: 10.4mm Diameter x 10.9mm Long
QTY: 1 x Connector
This waterproof connector is Field Installable and creates a reliable, waterproof connection without any special tools or chemicals. Avoid messy silicone goop and layers of ugly electrical tape - Our line of Waterproof connectors is perfectly suited for Marine, Automotive, and Industrial applications. Available in Inline Connectors, Panel/Chassis Mount Connectors and Pre-assembled cables, you can be sure to find the right combination of connectors to fit your needs. Ideal for power transmission (up to 5A) and communications/data purposes.
A series of internal compression gaskets and o-rings combine with a positive locking, threaded ring on the male connector to securely attach the connectors together while maintaining a water-tight seal around the cable.
Designed for easy installation in the field, these connectors are easy to assemble - only a soldering iron and wire cutters are required. Internal gaskets in the connector housing compress to fully seal around the cable as it exits the connector. No additional waterproofing is necessary.
| Number of Pins: | 2 |
| Rated Current (40°C): | 5 Amps |
| Voltage Rating: | 110 Volts |
| Max Wire Gauge: | 20 AWG |
| Max Panel Thickness: | 4.0mm |
| Environmental Protection: | IP67/IP68 |
| Mechanical Life: | 500 Mating Cycles |
| Operating Temperature: | -45°C ~ 105°C |
Max Panel Thickness: 4mm
Panel Cutout: 10.4mm
Dimensions: 10.4mm Diameter x 10.9mm Long
QTY: 1 x Connector