Home
> Arduino & Raspberry Pi Products
> Motors & Gears
> NEMA 17 Stepper Motor (2.0A / 1.8° / 59inoz)
NEMA 17 Stepper Motor (2.0A / 1.8° / 59inoz)
SKU: VUPN7972
This is a high quality NEMA 17 sized stepper motor. It is the same motor used on many 3D Printers, and is also suitable for other 3D printer designs such as the reprap.
| Rated Current: | 2.0A |
| Voltage: | 2.8VDC |
| Degrees Per Step: | 1.8° |
| Holding Torque (2 phase on) N.m: | 0.59 |
| Shaft Size: | 5mm diameter x 20mm long |
| Connection: | 4 x 12" stranded wire leads, color coded, 22awg going to a 4PIN Single Row BLS connector |
| Mounting: | NEMA 17 Standard, 4 tapped/threaded holes, M3 |
| Approximate Weight: | 0.810 Pounds (0.37 Kg) |
These motors are brand new, and are a regularly stocked item. Item may vary slightly from picture.
QTY: 1 x NEMA 17 Stepper Motor (2.0A / 1.8° / 0.59)
This is a high quality NEMA 17 sized stepper motor. It is the same motor used on many 3D Printers, and is also suitable for other 3D printer designs such as the reprap.
| Rated Current: | 2.0A |
| Voltage: | 2.8VDC |
| Degrees Per Step: | 1.8° |
| Holding Torque (2 phase on) N.m: | 0.59 |
| Shaft Size: | 5mm diameter x 20mm long |
| Connection: | 4 x 12" stranded wire leads, color coded, 22awg going to a 4PIN Single Row BLS connector |
| Mounting: | NEMA 17 Standard, 4 tapped/threaded holes, M3 |
| Approximate Weight: | 0.810 Pounds (0.37 Kg) |
These motors are brand new, and are a regularly stocked item. Item may vary slightly from picture.
QTY: 1 x NEMA 17 Stepper Motor (2.0A / 1.8° / 0.59)