DPDT Miniature Slide Switch On-On (or Off) 6A
SKU: VUPN7962
manufacturer: Philmore
manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw. NOTE: Screws are often included, however the manufacturer sometimes does not supply them. This means that there is a chance the screws are NOT included. If you 100% for sure need the screws, please call after placing your order or let us know in the order comments section while placing your order online. Also, these switches can come in either BLACK case or gold/steel copper wash. This selection is at random depending on the supply from the manufacturer.
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
QTY: 1 x DPDT Miniature Slide Switch On-On (or Off) 6A
manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw. NOTE: Screws are often included, however the manufacturer sometimes does not supply them. This means that there is a chance the screws are NOT included. If you 100% for sure need the screws, please call after placing your order or let us know in the order comments section while placing your order online. Also, these switches can come in either BLACK case or gold/steel copper wash. This selection is at random depending on the supply from the manufacturer.
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
| Configuration: | DPDT (On-On) |
| Terminal Type: | Solder Terminals for 24AWG + Smaller Wire |
| Current Rating: | 6A / 125VAC |
| Initial Contact Resistance: | 5 Meg ohm (Max) |
| Insulation Resistance: | 100 Meg Ohm (Min) |
| Dielectric Strength: | 1000V AC for 1 minute |
| Contact Material: | Bronze, Silver Plated |
| Terminal Material: | Copper, Silver Plated |
manufacturer: Philmore
manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw. NOTE: Screws are often included, however the manufacturer sometimes does not supply them. This means that there is a chance the screws are NOT included. If you 100% for sure need the screws, please call after placing your order or let us know in the order comments section while placing your order online. Also, these switches can come in either BLACK case or gold/steel copper wash. This selection is at random depending on the supply from the manufacturer.
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
QTY: 1 x DPDT Miniature Slide Switch On-On (or Off) 6A
manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw. NOTE: Screws are often included, however the manufacturer sometimes does not supply them. This means that there is a chance the screws are NOT included. If you 100% for sure need the screws, please call after placing your order or let us know in the order comments section while placing your order online. Also, these switches can come in either BLACK case or gold/steel copper wash. This selection is at random depending on the supply from the manufacturer.
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
| Configuration: | DPDT (On-On) |
| Terminal Type: | Solder Terminals for 24AWG + Smaller Wire |
| Current Rating: | 6A / 125VAC |
| Initial Contact Resistance: | 5 Meg ohm (Max) |
| Insulation Resistance: | 100 Meg Ohm (Min) |
| Dielectric Strength: | 1000V AC for 1 minute |
| Contact Material: | Bronze, Silver Plated |
| Terminal Material: | Copper, Silver Plated |