Vetco Electronics • 425-641-7275

TOP
Browsing as guest
Log in

Back

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

  • {{ highlight }}


Tap For Full Product Description
Hide Full Product Description

Product Description


MG Super Shield Nickel Conductive Coating Spray - 12oz
MG Chemicals Part Number: 841AR-340G

NOTE: THIS PRODUCT CANNOT BE SHIPPED BY AIR - IT MUST SHIP UPS GROUND ONLY

Reduce or eliminate EMI / RFI interference with this easy to apply conductive nickel spray!

This spray is an effective EMI/RFI shielding paint for use on plastic electronics enclosures. Consists of a tough, durable acrylic base pigmented with a high purity nickel flake.
Features:
  • UL Recognized (File # E202609)
  • Tested in compliance with IEEE Std. 299-1997
  • Median attenuation 50 dB ±25 dB per 38 µm (~1.5 mil) for frequency range of 10 to 18,000 MHz
  • High Conductivity—Low Surface resistivity of 0.6 Ω/sq for one coat
  • Tough and durable coating
  • Stronger adhesion than water based coatings
  • Low VOC’s
  • Thin or clean with M.G. Thinner Cleaner (MG-435-1L)

Applications & Uses:
This chemical's primary applications are in cell phones, PDA’s, other consumer electronics, telecommunication equipment, industrial equipment, medical devices, military devices, and aerospace equipment. It can also works well on drywall, and can be used to shield entire rooms. This is fantastic product for laboratory use, as you can quickly create effective RF shields.

Compatibility:
Adhesion—The MG-841AR Conductive Shield coating adheres to ABS, PBT, and most materials found on printed circuit assemblies; however, it is not compatible with contaminants like water, oil, and greasy flux residues that may affect adhesion. If contamination is present, clean the surface to be coated first.
Specifications:
AEROSOL SPECIFICATIONS:
Curing & Work Schedule Aerosol Liquid
Dry to Touch (aerosol) 30 to 45 s 3 to 5 min
Recoat time (aerosol) 1 min 2 min
Full Cure at room temp. 24 hour 24 hour
Full Cure at 65 °C 15 min 60 min
Shelf Life 1 year 60 min
Storage Temperature Limits -5 to 40 °C
(23 to 104°F)
-5 to 40 °C
(23 to 104°F)
Service Ranges Aerosol Liquid
Service Temperature -40 to +120 °C
(-40 to +248 °F)
-40 to +120 °C
(-40 to +248 °F)
Maximum Coverage per can per liter
for 38 µm (1.5 mil) 2 (2) 2 (2)
Electric Properties - Cured
Surface Resistance (Aerosol):
See Chart
1 × coat @ 1.0 mil ≤0.7 ohm/sq
2 × coats @ 1.5 mil ≤0.3 ohm/sq
3 × coats @ 2.0 mil ≤0.2 ohm/sq
Surface Resistance (Liquid):
1 × coat (~1.50 mil) ≤0.6 ohm/sq
2 × coats (~3.00 mil) ≤0.25 ohm/sq
3 × coats (~4.50 mil) ≤0.15 ohm/sq
Shielding Attenuation: Frequency Attenuation
for 33 µm [1.5 mil]
IEEE STD 299-1997 10 to 100 kHz 42 dB to 75 dB
100 kHz to 1 MHz 42 dB to 69 dB
1 MHz to 10 MHz 40 dB to 69 dB
10 MHz to 100 MHz 24 dB to 40 dB
100 MHz to 1 GHz 29 dB to 48 dB
1 GHz to 10 GHz 31 dB to 57 dB
10 GHz to 18 GHz 31 dB to 58 dB
Physical Properties - Cured
Color
Stainless steel
Abrasion resistant
Yes
Blister resistant
Yes
Peeling resistant Yes
Shielding Effectiveness See Chart
Physical Properties - Uncured Aerosol Liquid
Color
Steel Grey Steel Grey
Viscosity at 25 °C [77 °F] 100 cP [0.1 Pa·s] 3920 cP [3.92 Pa·s]
Density 1.65 g/mL 1.65 g/mL
Solids Percentage (wt/wt) ~41% ~65%
Flash Point -18 °C [-0.4 °F] -18 °C [-0.4 °F]
Odor Ethereal Ethereal

QTY: 1 x Super Shield Nickel Conductive Coating Aerosol Spray Can - (12oz / 340g)



Click here to read the California regulatory warning.