Your cart

Your cart is empty

Home > Maker / DIY / Learning > Motors & Gears > High Torque Electric Gear Motor 220 RPM - 6V

High Torque Electric Gear Motor 220 RPM - 6V

SKU: LS-00041
Regular price $31.00
Unit price
per

High Torque Electric Gear Motor 220 RPM - 6V

 

This is a very high quality, perfect for RC cars and trucks. Look at the specs below and see if you can use one for your project today! If this motor were a Mexican film producer, it might be refered to as "GearMotor del Toro". Or maybe not. Either way, you need one. So you should add this to your cart!



Main body length: 2.105 inches (53.48mm)

Entire motor length, including shaft and contacts: 3.461 inches (87.93mm)

Width/Diameter: 0.959 (24.37mm)

Screw hole centers are roughly: 0.663 inches (16.85mm) apart

Shaft bearing/bushing bezel diameter: 0.274 inches (6.97mm)

Protruding shaft length: 0.888 inches (22.55mm)

Geared Shaft diameter: 0.159 inches (4.05mm)

Non-geared Shaft diameter: 0.078 inches (2mm)

Non-geared Shaft length: 0.365 inches (9.29mm)

Gear Ratio: 1:45



Voltage: About 3V minimum and certain 6 volts DC max.

RPM: 150 to 220 (depending on voltage)



All measurements are approximate. We can NOT give more accurate measurements.

USA STOCK, call for stock status.

Pack Quantity: 1 pc



High Torque Electric Gear Motor 220 RPM - 6V

SKU: LS-00041
Regular price $31.00
Unit price
per
Fast Shipping
Secure payment
Availability
 
(0 in cart)
Shipping calculated at checkout.

You may also like

High Torque Electric Gear Motor 220 RPM - 6V

 

This is a very high quality, perfect for RC cars and trucks. Look at the specs below and see if you can use one for your project today! If this motor were a Mexican film producer, it might be refered to as "GearMotor del Toro". Or maybe not. Either way, you need one. So you should add this to your cart!



Main body length: 2.105 inches (53.48mm)

Entire motor length, including shaft and contacts: 3.461 inches (87.93mm)

Width/Diameter: 0.959 (24.37mm)

Screw hole centers are roughly: 0.663 inches (16.85mm) apart

Shaft bearing/bushing bezel diameter: 0.274 inches (6.97mm)

Protruding shaft length: 0.888 inches (22.55mm)

Geared Shaft diameter: 0.159 inches (4.05mm)

Non-geared Shaft diameter: 0.078 inches (2mm)

Non-geared Shaft length: 0.365 inches (9.29mm)

Gear Ratio: 1:45



Voltage: About 3V minimum and certain 6 volts DC max.

RPM: 150 to 220 (depending on voltage)



All measurements are approximate. We can NOT give more accurate measurements.

USA STOCK, call for stock status.

Pack Quantity: 1 pc