Vetco Electronics • 425-641-7275

TOP
Browsing as guest
Log in

Back

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

  • {{ highlight }}


Tap For Full Product Description
Hide Full Product Description

Product Description


DPDT Round Momentary Rocker Switch (On)-Off-(On) 16A 125VAC

This round rocker switch is perfect for use in hobby, automotive, or repair applications. It features an easy to mount snap-in design and .187" quick connect terminals. Quality nylon construction. This switch works great as an up/down switch for automotive windows, motors, etc.



Type: DPDT Momentary, (ON)-OFF-(ON) (Momentary Both Sides)

Action Type: Normally Open

Contact Material: Silver Plated Brass

Terminal Material: Copper Alloy

Terminals: .187" Quick Connect

Rating: 16A 125VAC, 10A 250VAC

Mounting hole: 0.79" (20.2mm - Approx 51/64")

Maximum panel thickness: 3.0mm

NOTE: The mounting hole should be drilled large enough that the barbs/tabs are depressed when inserted, but not so depressed that they press entirely against the entire length of the side wall of the switch. If the hole is drilled small enough to do that, then the hole was drilled too small for the switch diameter, and is putting “excessive and out of spec” pressure on the exterior of the switch housing. The mounting hole should be at least 20.00mm (0.79 inches) round/diameter, minimum. Any hole smaller than this is out of spec for this switch and is not supported. And is an abnormal operating enviroment that may cause the switch to malfunction.



QTY: 1 Switch




Click here to read the California regulatory warning.