120/220VAC Circuit Analyzer - (Voltage, Frequency, Load + More!)
Gen ca10

120/220VAC Circuit Analyzer - (Voltage, Frequency, Load + More!)

Part number: GEN-CA10
$99.99
120/220VAC Circuit Analyzer - (Voltage, Frequency, Load + More!)
General Tools Part Number: CA10

This piece of test equipment is ideal for identifying 110/220VAC power circuit and wiring problems that can cause shocks, sparks, fires, equipment failures and poor equipment performance. It features a sophisticated micro-controller than analyzes several parameters of the AC circuit under test, including the ability to measure the voltage drop under a load of 12A, 15A and 20A, on both 2 and 3 phase systems.

This would be an ideal addition to an Electrician or building maintenance tool kit.

Features:
  • Measures a branch circuit’s line voltage, peak voltage and neutral-to-ground voltage
  • Calculates a circuit’s voltage drop in response to 12A,15A and 20A loads
  • Measures the impedance of hot, neutral and ground conductors as well as available short-circuit current(ASCC)
  • Identifies wiring configurations and detects wiring faults and missing ground wires
  • Tests the reliability and response time of GFCIs (ground fault circuit interrupters) and RCDs (residual current devices)
  • Displays True RMS readings of all voltages except peak voltages
  • Works with 2- and 3-phase circuits
  • Jumbo LCD with 30-second backlight
  • Familiar menu/sub-menu operation
  • Data HOLD button and 30-minute auto power off
  • Powered by six “AAA” batteries (not included)
Specifications:
Specifications:
Measurement Range Measurement Accuracy Resolution
Line Voltage: 85 to 265VAC ± 1.0% ± 0.2V 0.1V
Peak Voltage: 121 to 374VAC ± 1.0% ± 0.2V 0.1V
Line Frequency: 45 to 65 Hz ±1.0% ± 0.2Hz 0.1Hz
Voltage Drop: 0.1 to 99.9% ± 2.5% ± 0.2% 0.1%
Load Voltage: 10 to 265V ± 2.5% ± 0.2V 0.1V
Neutral-to-Earth
Voltage:
0 to 10VAC ± 2.5% ± 0.2V 0.1V
Hot, Neutral and
Ground Line Impedance:
0 to 3Ω ± 2.5%± 0.02Ω 0.01Ω
GFCI Triggering Time: 1ms to 6.5 sec. ± 1.0% ± 2ms 1ms
RCD Triggering Time: 1ms to 6.5 sec. ± 1.0% ± 2ms 1ms
RCD Triggering Current: 30 to 37mA ± 1.0% ± 0.2mA 0.1mA

This set includes: 12 AWG, 20 in. (0.5m) Long Test Cable, Soft Carrying Case,User’s Manual, 1 Year Limited Warranty from General Tools - 30 Day Warranty from Vetco Electronics.
QTY: 1 x 120/220VAC Circuit Analyzer - (Voltage, Frequency, Load + More!)
Product condition: New